Jsea checklist
Job safety and environmental analysis
What does this form include?
This form contains 9 sections:
Common hazards
- Aware of site safety requirements e.g. PPE to be won on site
- Aware of site traffic requirements
- Aware of where to locate equipment
- Aware of where to drop off or pick up equipment
- Fit for work
Control measures
- Report to site office to get directions
- Report to site supervisor
- Report to site personnel
- Accurate directions supplied from transport controller, hire office or service controller
- Attended site induction
- Escorted around site by site personnel
- Do not need to enter site
- Where required, Permit to work issued by site supervisor
- Ensure adequate rest period has been taken between shifts
- Not effected by alcohol or drugs (as per Coates Alcohol and Drug Policy)
Is the job site safe?
Other
Control Measures
- Ground conditions assessed by competent person
- Vehicle/ crane/ equipment is on FIRM LEVEL ground
- Fully extend outriggers on cranes or equipment where fitted
- Suitable packing is to be used under outriggers/ stabilisers
- Set up a crane/ equipment's nearest outrigger to the trench, as far away from the trench as the trench is deep
- Ensure adequate distance/ protection is maintained for all onsite facilties, structures or equipment
- Relocate position of crane or equipment if necessary
- Use a tag line
- Use a spotter
- Obtain authority to trim trees/ flora if trimming is required
- Use trak mats
- Advise site supervisor of site housekeeping issues that will affect the job
- Wear suitable protective footwear/ clothing
Look up and Live. Common hazards
- Locate power lines
- Overheard services
- Live Aerial conductors (power lines)
- Gas Transmission Lines
- Above ground pipes
Is job site safe?
Common Hazards
Signature
Use this template