Annual fire extinguisher certificate of maintenance checklist
Kevin lewis technician::Bsafe fire protection
What does this form include?
This form contains 8 sections:
Bsafe fire 42 Dunn place winchburgh EH526UH
We have today inspected and serviced as necessary to BS5306; Parts 3 & 8 2009, THE FOLLOWING EXTINGUISHERS WHICH WERE LEFT IN GOOD WORKING ORDER except where indicated below: PLEASE NOTE COMMENTS BELOW UNDER SPECIAL REMARKS
Schedule Of Equipment
- Number of Water Extinguishers
- Number of Foam Extinguishers
- Number of Carbon Dioxide Extinguishers
- Number of Dry Powder Extinguishers
- Number of Wet Chemical Extinguishers
- Number of Fire Blankets
Special Remarks & Parts used
- Do any Extinguishers require refilling & recharging
- Do any Water, Foam or Dry Powder Extinguishers require "Extended Maintenance"
- Do any Carbon Dioxide Extinguishers require "Overhaul Maintenance"
- Have the above been passed fit for use
- Have any extinguishers Been condemned
- Have all Extinguishers been passed fit for use
- Are all Extinguishers either wall mounted on Brackets or Extinguisher Stands
- Is there adequate provision of Portable Fire Extinguishers
- Are all Extinguisher locations and type clearly marked with Identification Signs
Routine Inspection By User It is recommended that regular inspection of all extinguishers, spare gas cartridges and replacement charges should be carried out by the user or user's representative at intervals, to make sure that appliances are in their proper position and have not been discharged, or lost pressure (in the case of fire extinguishers fitted with a pressure indicator), or suffered obvious damage. The frequency of inspection should not be less than annually The user should replace existing extinguishers not available for use by serviceable extinguishers. Under Contract to bsafe fire protection Agreement No: bs0001
Next service due date Date
Maintenance Technician: kevin lewis fire protection association membership 27213
Signature of Responsible Person
Use this template