Osha scaffold inspection checklist
Use this osha scaffold inspection checklist to inspect scaffolds and scaffold parts before each work shift, and after any event that may have caused damage. make sure that only trained and fully equipped personnel will be performing the task. use iauditor to document the inspection and provide an efficient report while on-site.
What does this form include?
This form contains 4 sections:
REFERENCE: Scaffolding parts[This is an example of how you can use iAuditor to include reference imag
SUPPORTED SCAFFOLD INSPECTIONS
- Check to see if power lines near scaffolds are de-energized or that the scaffolds are at least 10 feet away from energized power lines.
- Make sure that tools and materials are at least 10 feet away from energized power lines.
- Verify that the scaffold is the correct type for the loads, materials, workers and weather conditions.
- Check footings to see if they are level, sound, rigid, and capable of supporting the loaded scaffold.
- Check legs, posts, frames, and uprights to see if they are on baseplates and mudsills.
- Check metal components for bends, cracks, holes, rust, welding splatter, pits, broken welds, and non-compatible parts.
- Check for safe access. Do not use the cross braces as a ladder for access or exit.
REFERENCE: Maximum Vertical Tie Spacing Wider Than 3'- 0" Bases[This is an example of how you can use
Full Name and Signature of the Inspector
Use this template