Machine inspection report checklist
Machine inspection report to ensure all manufacturing tasks have been completed
What does this form include?
This form contains 68 sections:
Customer
Machine type
Machine number
Date of dispatch Date
EXTRUDER
MECHANICAL CHECK LIST
EXTRUDER GEARBOX
Main Motor Speed
Extruder Gearbox Serial #
Gearbox Pulley Size
Belt Type/Number
Extruder Gearbox Ratio
Rotor Type
Motor Power
Gearbox Ratio
Serial Numbers (if applicable)
EXTRUDER MOTOR
Make
KW
Amps
RPM
Volts
ELECTRICAL CHECK LIST
Tightness Check
EXTRUDER DRIVE
Serial Number
POWER MODULE
EXTRUDER COOLING FAN
Frame Size
DICER MOTOR
DICER DRIVE CU
AUGER MOTOR
AUGER DRIVE
AUGER COOLING FAN
HEATER COOLING FANS (EBM)
CIRCUIT BREAKERS & PROTECTION HARDWARE CHECKS
- Main Isolator / Load A / Phase TP&N / Ref 3Q
- Extruder Drive / Load A / Phase TP / Ref 4Q
- Extruder Cooling Fan / Load A / Phase L / Ref 4Q
- Dicer Drive / Load A / Phase L / Ref 8Q
- Rollfeed Drive / Load A / Phase L / Ref 9Q
- Auger Drive / Load A / Phase TP / Ref 7Q
- Shredder / Load A / Phase TP / Ref 5Q
- Centrifuge / Load A / Phase TP / Ref 6Q
- Water Pump / Load A / Phase TP / Ref 6Q
- Granule Fan 2 / Load A / Phase TP / Ref 6Q
- Heat Exchanger Pump / Load A / Phase TP / Ref 6Q
- Hydraulic Pump / Load A / Phase TP / Ref 6Q
- Elevator / Load A / Phase TP / Ref 6Q
- Metal Detector / Load A / Phase L+N / Ref 6Q
- Vacuum Pump / Load A / Phase TP / Ref 6Q
- Vac Circulation Pump / Load A / Phase TP / Ref 6Q
- Socket / Load A / Phase L+N / Ref 3Q
- Auger Cooling Fan / Load A / Phase L / Ref 7Q
- Ram FWD / Load A / 24VDC / Ref 21F
- Ram REV / Load A / 24VDC / Ref 21F
SIEMENS RELAY's & MCB's
Miscellaneous
Transducer Make
Model
mA
Bar
PLC
HMI LANGUAGES
Any discrepancies should be noted below
SECTION THREE - TEST SHEET
- Was machine tested with customer supplied material?
Temperature Profile in ° C. Machine Pressure in Bar
Machine Amps
Percentage Speed
Screen Pressure
Screen pressure Alarm Set Point
Die Face Pressure
Die Face pressure Alarm Set Point
Knife Speed
Blade Type & Configuration
Dieface Configuration
Filter Mesh Size
Maximum Output (kg)
Test Length
Comments
Machine Serial Number
PALLET 1
PALLET 2
PALLET 3
Comments or additional information
Add any additional relevant photos
I confirm that the above QC checklist and packing list were completed to my satisfaction. Any comment
Inspector Name and Signature
Use this template