Is - workshop machine maintenance - corner notching machine checklist
This checklist is to be used in conjunction with the equipment's maintenance manual.
What does this form include?
This form contains 12 sections:
Ensure all safety signage is in place
- Ensure all safety signage is in place
- Are guards and shield are tight and secure ?
- Clean and lubricate bed
Check Blade Gap
Adjusted
Inspect external set square adjustment
- Inspect external set square adjustment
Lubricate the guiding rods with grease
- Lubricate the guiding rods with grease
- Inspect condition of hydraulic oil
Inspect the oil level on the hydraulic tank (ref E-1.2 oil level display in manual)
- Inspect the oil level on the hydraulic tank (ref E-1.2 oil level display in manual)
- Oil topped up
Clean and lightly lubricate the the blade carrier and slots with oil
- Clean and lightly lubricate the the blade carrier and slots with oil
Inspect the condition of the oil filter
- Inspect the condition of the oil filter
The area between the bottom blade holder that touches the handle wheel should be cleaned and lubricated
- The area between the bottom blade holder that touches the handle wheel should be cleaned and lubricated
Inspect operation of the on/off switch and E-Stop were fitted
- Inspect operation of the on/off switch and E-Stop were fitted
Note action taken to repair and or isolate
Signature of person conducting maintenance
Use this template