Fire door inspection checklist
Abm fire door inspection
What does this form include?
This form contains 13 sections:
Important Information
Fire door Checklist
Fire door checklist
- Has the fire door got a BWF-CERTIFIRE Fire Door Scheme label on the top edge?
Door Leaf
- Does the door leaf sit against the door stop, flush with the frame and is free of distortion?
- If the door is veneered or lipped,is the glue still holding these products firmly in place?
- Is the door free from damage including dents chips and holes?
Door frame
- Is the door frame firmly attached to the wall?
Intumescent/smoke/acoustic Seals
- Are the intumescent seals in place?
- Are Seals free from paint or varnish?
- Are the seals well attached inside the groove in the frame or door leaf?
- Are the seals free from damage?
- If you have a brush or fin type seal, is it free from damage or breakage?
- If fitted, are the smoke and acoustic seals continuous around the frame or door leaf?
Hinges
- What type of hinge is fitted to the door?
Door Closers
- Open the door to 5 degrees or 75mm. Does it close and engage with the latch?
- Is the closer correctly attached to the door and frame?
- Is the closer free from damage and not leaking?
- If unmatched, does the closer hold the door in line with the frame and instrument seal?
Hold Open Devices- only electronically powered allowed
- Does the hold open device release the door when required?
Lock and Latch
- Does the latch hold the door firmly in place without rattling?
Threshold gap
- Is there a consistent gap under the door that allows it to swing without touching floor covering?
Glazing and Glassware
- Is the intumescent seal continuous and attached to the glass and the bead?
- Are the glazing beads well attached to the frame and free from damage?
- Is the glass free from damage and cracking?
Use this template