Template Information
Sunshine crane repairs.
Category: manufacturing
Template Questions
- Crane identification number
- Job number
- Hoist manufacturer?
- Maximum Rated Capacity MRC Working Load Limit WLL
- Time on site Date
- Visitor Pass number
- Work Permit Number
- Controls to be used
- Any other comments
- Chain condition
- Pitch over 10 links; wear allowance 10% 6.3 = 190mm - 209mm 7.1 = 210mm - 231mm 10.0 = 300mm - 330mm 11.2 = 340mm - 374mm
- Gypsy gear condition
- Working height limit adjustment
- Working height limit switches
- Air gap
- Couplings
- Overall Visual Condition.10=Good.1=Bad
- Cross travel wheels
- Trolley type
- Mountings
- Overall visual wear condition.10=good.1=bad
- Power Supply system
- Control box
- Control box condition
- Year of manufacture or the year of the last major inspection
- Hoist is over 10 years old?
- Please note the working life of a crane is as per the manufacturer specifications or a maximum of 10
- The hoist requirers a replacement schedule to be set.
- 7.4 ASSESSMENT FOR SUITABILITY FOR CONTINUED SAFE USE 7.4.1 Assessment for continued safe operation C
- Is the crane in a suitable condition to be return into operation safely
- Is the crane over 25 years old
- Jib is free from any signs of structural deformation?
- Protective coatings are in a sound and serviceable condition?
- Signage
- Crows nest / service access
- Any comments
- Inspection technician to sign. All work has been done to comply with the relevant Australian Standards.
- Next routine inspection and service due. Date
- Time off site Date
- Customer to sign