Template Information
Category: general
Template Questions
- Add pictures - capture appropriate images of facility and project.
- Site note.
- 2. General Installation Overview
- 3. Cabling
- 4. Visual Presentation System
- Brand / Model / Serial number
- Brand / Model / Serial Number.
- Installation location:
- Brand / Model.
- Installed location.
- 5. Connection Plate
- Installed location:
- Signal / Connection type:
- 6. Camera
- Signal type:
- Where is the Camera installed?
- Brand / Model / Serial number.
- Device type:
- 7. Source Device
- 8. Lectern
- Brand / Model:
- 9. Microphone
- 10. DSP
- (type only, not individual element)
- 11. Speaker System
- 12. Hearing Augmentation System
- 13. Video Conference System
- 14. Audio Conference System
- 15. Capture Device
- 16. Network
- 17. Control System
- 18. Control Panel
- 19. Motion Sensor
- 20. Reed Switch
- 21. Room Linking
- 22. Lighting
- Rack pictures (take finish photo from front, rear and sides)
- Rack location.
- 23. Rack
- 24. Fly Leads
- 25. System Calibration
- Capture RTA image for ambient noise, A-weighted, slow average.
- Description
- Impedance:
- All speakers shall be connected in the same polarity, and speech reinforcement system shall be polari
- Use continuous sweep signal at headroom level for this "Buzzes and Rattles" test.
- Record the "house curve" before equalisation, as well as after the equaliser have been tuned, with an
- 26. Operation
- 27. Software
- 28. Equipment Remote Controls
- 29. User Manuals
- 30. Audio Visual Schematics
- Record all equipment not on schematic but present.
- Record all equipment on schematic but not present, and why.
- Has practical completion been met, what is the date PC is effective from? Date
- Works To Do:
- 31. Sign off
- Comments:
- Client sign off (if present for testing)
- Select date Date
- Commissioning of the system is complete, all defects have been rectified and is now ready for handover (Signed by Commissioning Engineer).
- InfoComm, 2006, 'Basics of Audio and Visual Systems Design'Giddings, 1990, 'Audio Systems Design and