Cessna 172 annual::100 hour inspection checklist template
This customizable digital annual or 100-hour inspection checklist can be used by aircraft operators to streamline inspections and strengthen their compliance to the faa. with this checklist template, cessna 172 operators can properly document inspections and ensure the airworthiness of their aircraft. this template only covers the first set of operations often required for a cessna 172 annual inspection. customize this template to include your preferred set of inspection procedures.
What does this form include?
This form contains 66 sections:
undefined
undefined
Current Nautical Reading
Check for damage and security
Aileron, Elevator, and Rudder Stops
- Is there any repair needed?
Inspect seat tracks for condition and security of installation. Check seat track stops for damage and
Seat Tracks and Stops
- Is there any repair needed?
Inspect for skin damage, loose rivets, and condition of paint.
Wing Surfaces and Tips
- Is there any repair needed?
Check for dents, cracks, loose screws and rivets, and condition of paint.
Wing Struts and Strut Fairings
- Is there any repair needed?
Inspect externally for skin damage and condition of paint
Vertical and Horizontal Stabilizers, Tips and Tailcone
- Is there any repair needed?
Inspect bulkheads, spars, ribs, and skins for cracks, wrinkles, loose rivets, corrosion, or other dam
Vertical and Horizontal Stabilizers and Tailcone structure
- Is there any repair needed?
Check condition, security and operation.
Ailerons and Hinges
- Is there any repair needed?
Check condition, operation, and security of attachment.
Aileron Structure, Control Rods, Hinges, Balance Weights, Bellcranks, Linkage, Bolts, Pulleys, and Pulley Brackets -
- Is there any repair needed?
Check freedom of movement and proper operation through full travel with and without flapsextended.
Aileron Controls
- Is there any repair needed?
Check tracks, rollers, and control rods for security of attachment. Check operation.
Flaps
- Is there any repair needed?
Clean and lubricate
Flap Actuator Threads
- Is there any repair needed?
Check freedom of movement and proper operation through full travel with and without flaps extended.
Elevator Control
- Is there any repair needed?
Check condition, security, and operation.
Elevator, Hinges, and Cable Attachment
- Is there any repair needed?
Check condition, security, and operation
Elevator Trim Tab and Hinges
- Is there any repair needed?
Inspect the rudder skins for cracks and loose rivets, rudder hinges for condition, cracks and securit
Rudder
- Is there any repair needed?
Rudder, Tips, Hinges, and Cable Attachment
- Is there any repair needed?
Inspect for cracks, dents, and other damage, security of cowl fasteners, and cowl mounted landing lig
Cowling
- Is there any repair needed?
Inspect for evidence of oil and fuel leaks. Wash engine and check for security of accessories.
Engine
- Is there any repair needed?
Check general condition, freedom of movement through full range. Check for proper travel, security of
Engine Controls and Linkage
- Is there any repair needed?
Inspect for damage, condition, and security.
Ignition Switch and Electrical Harness
- Is there any repair needed?
Inspect for wrinkles, damage, cracks, sheared rivets, etc. Check cowl shock mounts for condition and
Firewall Structure
- Is there any repair needed?
Check condition, security, and alignment
Engine Shock Mounts, Engine Mount Structure, and Ground Straps -
- Is there any repair needed?
Check security of clamps, tubes, and ducting. Inspect for evidence of leakage.
Induction System
- Is there any repair needed?
Remove air filter and inspect hinges, doors, seals, and attaching parts for wear and security. Check
Induction Airbox, Valves, Doors, and Controls
- Is there any repair needed?
Remove and clean. Inspect for damage, and service per Paragraph 2-22 and 2-22A
Induction Air Filter
- Is there any repair needed?
Check for obstructions, operation, and security.
Alternate Induction Air System
- Is there any repair needed?
Check condition and security. Check alternator belts for condition and proper adjustment. Check belt
Alternator, Mounting Bracket, and Electrical Connections
- Is there any repair needed?
Clean and remove any corrosion. Check cables for routing, support, and security of connections.
Battery Box and Cables
- Is there any repair needed?
Inspect wiring, mounting, condition, and wire routing.
Alternator Control Unit
- Is there any repair needed?
Inspect for condition and security
External Power Receptacle and Power Cables
- Is there any repair needed?
Full Name of Maintenance Personnel
undefined
Date of Completion of Maintenance work Date
Contact Details
Use this template