Aldi maintenance checklist

Template Information

Aldi maintenance

Category: general

Template Questions

  • Are you inducted
  • Store manager issues or concerns
  • Case cleanliness
  • Check temperature control
  • Does temperature display match probe readings ?
  • Check expansion valve operation
  • Check evaporator fan operation and case airflows
  • Are night blinds operating correctly ?
  • Check milk lift up front operation
  • Condition of night blind
  • Check tundish operation
  • Are all case lights working ?
  • Shelf condition
  • Are bumpers in good condition ?
  • Is there under slab condensation ?
  • Notes
  • Does temperature display match probe readings?
  • Are night blinds operating correctly?
  • Clean case drain pan and trap
  • Check stock in not over return air grills or buffered against back wall
  • Case cleanliness?
  • Are bumpers in good condition?
  • Is there under slab condensation?
  • Check case operation
  • Are plastic guards on controller present
  • Does temperature display match probe readings
  • What is the condition of lids and do any need replacing
  • Condition of skirting
  • Are bumpers in good condition
  • Advise staff of manual defrost for freezers with exessive ice build up
  • light box covers in good condition
  • Are sheet metals infills in good condition
  • Is skirting inside cool room in good condition?
  • Check condition of walls and wall junctions
  • Are all defrost and drain heaters operating correctly?
  • Perform leak test
  • is there excessive icing around room door or evaporator?
  • Check lights and switch opperation
  • Are external bumper rails in good confition
  • Is expansion valve operating correctly?
  • Is plant area clear of debris
  • What condition is fence around plant like?
  • Check gate locks correctly
  • Mains voltage
  • Check all contactors
  • Are all board connections secured properly ?
  • Check control set points and operation
  • Are all compressors operating correctly ?
  • Are there any oil leaks on rack or condensing units?
  • Record compressor oil levels and pump pressures
  • Record suction pressures of compressors
  • Record compressor discharge pressures
  • Record and adjust compressor safety cutouts if necessary
  • Check compressor connections are all secure and free from excessive age
  • Is condenser operating correctly ?
  • Check all fan and electrical connections are securely fastened
  • Record currant draw of all fans
  • Check operation of refrigeration alarm
  • Issues staff have been notified to fix
  • Sign out of contractors book
  • Store manager
  • A J Baker technician
  • Store stamp